Calls to the mobile go to a voice agent, and Telegram gets the summary, transcript and recording. A customer story: forwarding codes, instructions for the agent, a Python program and prices.
We went through 1574 requests, 43% of them about money. How Aya answers our customers in WhatsApp and by phone, the pitfalls we hit and what you will soon be able to do.
An honest person calls right away, while a fraudster needs time. How caller numbers get spoofed and why the second attempt should already use a code, and the third a messenger.
I don't answer calls from unknown numbers, so I built myself a secretary in Telegram: I send her a number, she calls back and writes who it was and why. About a hundred and fifty lines of Python and all the code.
The V-SIPGW virtual card, a trunk without registration and the transit call permission: the very setting that makes Panasonic accept a call and drop it right away.
Two paths for older platforms: a SIP trunk if your version can handle it, and an inexpensive gateway in front of the PBX if SIP runs into licensing or isn't there at all.
A carrier-grade platform is configured by an integrator, so here is a list of requirements you can hand over in full: IP trunk, outbound route, number override, media subnet.
A SIP Line with a URI mask, an Incoming Call Route out to the carrier's line group, and for Aura: SIP Entity, Routing Policy and route pattern in Communication Manager.
SIP Trunk and route pattern in CUCM, two dial-peers and allow-connections sip to sip on CME. Plus Calling Party Transformation, without which the carrier rejects calls.
A Peer trunk by IP without registration, routing calls from the trunk to the outside and CallerID override. With a look at where exactly Yeastar hides the key permission.
A Peer trunk by IP, the PCMA codec and routing calls from the trunk to the outside, in the terms of the UCM63xx menu. With an honest warning about what to check first.
Call campaigns through your PBX: from your numbers and through your carrier. Ready-made pjsip.conf and extensions.conf sections, trunk fields in FreePBX, TLS with SRTP and the five most common mistakes.
One tag in square brackets and a phrase sounds angry, happy or whispered. Three before-and-after pairs of recordings, how it works and an honest look at where emotions help and where they hurt.
The contact pressed a button, the branch ran, but not everyone got the message. We explain why a send step placed after audio loses some of the SMS, how to spot this in the report and in what order to place the steps.
Five seconds of recording and a neural network speaks in your voice. We look at why the best open models can't be used commercially, what breaks Russian, what Kazakh is missing and how much you really need to record.
The number in your phone book hasn't changed, yet a stranger picks up. Three reasons this is dangerous and how to check a number in a minute. With a breakdown of a real SIP dump: how we searched for a call that wasn't in our database.
We described the task to a neural network, and it came up with the mechanics itself. 100 calls to our own customer list: 58 answered, 39 quiz participants, 18 people wrote to support on their own. The full prompt and unedited transcripts.
An event in your store triggers the AI agent: it calls, pulls the cart from your API on its own, talks to the customer and sends the outcome to managers in Telegram. Full code included.
One POST creates a contact list, synthesizes the audio and starts the campaign. We cover arrays of objects, conditionally required fields and HTTP status codes.
Soon an incoming call from a business will show the company name instead of just a number. We explain how it works and when to expect it in Kazakhstan.